FUJITSU E7110 - Manual (Page 5)

5
Floppy Disk A: ■ Disabled
■ 1.44/1.2 MB
3.5"
[1.44/1.25 MB
3.5"] Sets the format for floppy disk drive A if it is installed.
Primary Master: ■ Selects Primary
Master submenu
The product
number of the hard
drive. Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this interface.
Secondary Master ■ Selects Secondary
Master submenu
The product num-
ber of the
CD-ROM drive. Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Secondary Master submenu
allowing additional device configuration options for this interface
Language: ■ English (US)
■ Japanese (JP)
[English (US)] The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description
M a i n M e n u