FujiFilm FINEPIX JZ200 series - Manual (Page 22)

8 First Steps
Inserting the Battery and a Memory Card Inserting the Battery and a Memory Card
Insert the battery and memory card as described below.
1 Open the battery-chamber cover.
R Be sure the camera is off before opening the
battery-chamber cover.
Q Do not open the battery-chamber cover
when the camera is on. Failure to observe
this precaution could result in damage to
image files or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
2 Insert the battery.
Align the orange stripe on the battery with
the orange battery latch and slide the bat-
tery into the camera, keeping the battery
latch pressed to one side. When inserting
the battery, be sure that the battery is se-
cured by the orange battery latch. If the bat-
tery is not securely latched, the camera may
not turn on or may turn off without warning. Orange stripe
Battery latch
Q Insert the battery in the correct orientation. Do
NOT
use force or attempt to insert
the battery upside down or backwards. The battery will slide in easily in the cor-
rect orientation.