FUJITSU M4099D - Manual (Page 20)

2-3
Rollers
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Place the cleaning sheet on the
hopper table by aligning it with the
hopper guide (left) with the
adhesive side up. Then press
ENTER ; the cleaning sheet is fed.
■ Cleaning the Rollers with Cleaning Sheets
Set the hopper table guides to B4
width. Then, set the offline feed
test mode as follows:
While pressing MENU , turn on the
power; the LCD displays “Please
wait” then the <<MODE SELECT>>
screen appears with SETUP
blinking. Press
( Õ ) twice; TEST
blinks. Press ENTER three times;
The OFFLINE FEED TEST screen
appears with START blinking.
Hopper guide (left)
Front
Cleaning sheet
Cleaning
sheet
Protective paper
Remove the protective paper from
the cleaning sheet.