Furuno GP-1850DF - Manual (Page 7)

1-1
1. Installation of Standard Equipment
1.1 Installation of Display Unit
Mounting considerations
The display unit can be installed on a tabletop, on the overhead or flush mounted
in a console or panel.
Overhead Tabletop Hard Cover
Figure 1-1 Tabletop, overhead mounting methods
When selecting a mounting location for the display unit keep the following in mind:
• Keep the display unit out of direct sunlight.
• The temperature and humidity should be moderate and stable.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the unit away electromagnetic field generating equipment such as motor,
generator.
• For maintenance and checking purposes, leave sufficient space at the sides
and rear of the unit and leave slack in cables.
• A magnetic compass will be affected if placed too close to the display unit.
Observe the following compass safe distances to prevent disturbance to the
magnetic compass:
Standard compass: 0.98 meters
Steering compass: 0.74 meters
• Rubber cushions which absorb vibration (supplied) may be attached as below
if vibration is a problem.
45
±
5mm
Aline with edge
of hanger.
Rubber cushion
TM-166 No.18 black