Top view – Fisher & Paykel NZ User Manual
Page 6
5
BI602CTE series Built-In Oven/Cooktop
Combination
1
Remove the brackets from the cooktop.
2
Place the cooktop in the cutout and secure
using the brackets previously removed.
3
Feed the cooktop wiring harness out
through the oven cavity.
4
Remove the oven connector block cover on
the oven top wiring cover.
5
Connect the cooktop wiring harness lining
the numbers/letters on the harness with
the numbers/letters on the oven connector
block. Leave plastic wiring card attached for
future reference.
6
Clamp the wiring harness with the wiring
clamp on the oven top wiring cover.
7
Replace the oven connector block cover.
8
Install the oven as described on page 2.
Cooktop Installation
5 4
P N
E E
N 3
2 1
5 4
P N
E E
N 3
2 1
harness detail
oven connector
block
plastic
wiring card
600 m
m
585 mm
Benchtop Detail
600 mm
20 mm
570 mm MIN
16-20 mm
Top View
460 m
m
oven
door
562 m
m
20 m
m
595 mm
578 mm
59
5 m
m
55
0 m
m
Benchtop
CookTop Cutout*
20 mm
Gap
15 mm
MIN.
55 mm
MIN.
OVEN
*see cooktop installation
instructions p/n 599100