Fisher-Price SMARTCYCLE RACER T3857 - Manual (Page 5)

5
Assembly
4
Frame Cover
(with Bolt)
Insert the frame cover with bolt into the •
hole on the side of the frame assembly.
Fully tighten the bolt.
•
5
Handlebar
Fit the handlebar onto the frame, •
as shown.
Hint: The handlebar will only fi t one way
onto the console. If it does not seem to fi t,
turn it around and try again!
Insert two screws into the handlebar •
and tighten.
Pull up on the handlebar to be sure it
•
is secure.
6
Turn both the frame and seat post •
assemblies upright.
Fit the seat post assembly onto the
•
frame assembly.
Insert two screws into the seat post
•
and tighten.
Hint: You may want to insert the frame
cover with bolt into the frame assembly
before inserting and tightening screws in
the post.