FUJITSU fi-5530C - Manual (Page 18)

10
3. Click [QuickScan PRO (Trial)] on the window
below.
4. Continue to install the application following the
instructions on the window.
5. Enter required information, then click [Next >].
6. Install the application following the instructions
on the window.
■ Confirming Installation
1. Load the documents on the scanner.
For details on loading documents, refer to "1.2
Loading Documents on the ADF for Scanning" in
the fi-5530C Operator's Guide on the Setup CD-
ROM.
2. Start QuickScan Pro TM .
From [Start] menu select [Programs]-[Quick-
Scan]-[QuickScan].
3. Select [Select Scanner...] from [Scan] menu in
QuickScan Pro TM .
And select fi-5530C from the list of [Scanner:],
and then click [OK] button.
4. Select [Preview Settings...] from the [Scan]
menu. Set the scan resolution, paper size and
other scanning conditions, and then click [OK].
ATTENTION
"QuickScan Pro TM " included in the Setup
CD-ROM is an trial version. For further use
after expiration of the trial period (up to 30
launches), it is necessary to purchase a
fully functional version of QuickScan
TM
Pro. (When you install the trial version, do
not change the Serial Number already dis-
played.)