Fluke 1654B - Manual (Page 2)

1652C/1653B/1654B Users Manual Supplement
12/10 1
Change #1,
56800
On page 3, add the following bullet:
• Do not use in CAT III or CAT IV environments without the protective cap
installed. The protective cap decreases the possibility of arc flash
caused by short circuits.
On page 6, under Operating the Tester Using the Rotary Switch, add the following:
WWarning
Do not use in CAT III or CAT IV environments without the protective cap
installed. The protective cap decreases the exposed probe metal to <4mm.
This decreases the possibility of arc flash from short circuits.
On page 45, under General Specifications, add the following to the Safety section:
Complies with EN/IEC 61010-031:2002+A1:2008.