First Virtual Communications Flash Audio Player SA3105 - Manual (Page 24)

24
6 Technical data
Power
• Power supply
310mAh Li-ion internal rechargeable
battery*
Display
• White backlight LCD, 160 x 128 pixels,
65K colors, QQCIF
Sound
• Channel separation: 40dB
• Equalizer setting:
Rock / Funk / Jazz / Classic / Hip-hop /
Dance / Off
• Frequency response: 80-18000Hz
• Signal to noise ratio: > 80dB
• Output Power (RMS): 2x3mW
Audio playback
• Compression format: MP3 (8-320kps and
VBR, Sample rates: 8, 11.025, 16, 22.050,
24, 32, 44.1, 48kHz), WMA (32-192kbps,
Sample rates: 8, 11.025, 16, 22.050, 24, 32,
44.1, 48kHz)
• Play time: 10 hours*
• ID3-tag support
Video playback
• .SMV format (other formats to be
supported by provided Media Converter)
• 11 frames per sec., QQCIF
Media converter
• Support format:
.bmp, jpg, mp3, .png, .tif, .wma, .wmv.
Recording
• Audio Capturing: Build-in microphone
(Mono)
Storage media
• Built-in memory capacity:
SA310x 512MB NAND Flash+
SA311x 1GB NAND Flash+
SA312x 2GB NAND Flash+
Connectivity
• Headphone 3.5mm, USB 2.0 (full speed)++
Music and photo transfer
• Drag and drop in Windows Explorer
Video transfer
• Via Philips Media Converter
Data transfer
• Via Windows Explorer
System requirements
• Windows® ME, 2000 or XP
• Pentium III 800MHz processor or higher
• 128MB RAM
• 500MB hard disk space
• Internet connection
• Microsoft Internet Explorer 6.0 or later
• Video display card
• Sound card
• CD-ROM
• USB port