4 connect and charge, 1 use the supplied usb c, Connect and charge – First Virtual Communications Flash Audio Player SA3105 User Manual

Page 12: Use the supplied usb cable, 2 battery level indication, 1 use the supplied usb cable

Advertising
background image

12

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:

Full

Two-thirds full

Half full

Low

Empty

*

Rechargeable batteries have a limited number of charge cycles and may eventually need to be
replaced. Battery life and number of charge cycles vary by use and settings.

3.4 Connect and charge

Your player will be charged when connected to the PC.

3.4.1 Use the supplied USB cable

1

Connect the supplied USB cable to the mini USB port at the bottom of the player, the
other end to your PC.

2

The player will start to charge as soon as it is connected to your PC.

3

Charge your player for at least 5 hours before using it for the first time. The battery* will
be fully charged (100%) in 4 hours and 80% charged in 2 hours.

Note The player is fully charged when the charging animation stops and

is

displayed. Your fully charged player will allow up to 10 hours** of music playback.

Note When the batteries are almost empty, the low battery screen

blinks. Your

player will power down in less than 60 seconds. Your player will save all settings and un-
finished recordings before it powers down.

Advertising