Farenheit Technologies T-1200CM - Manual (Page 6)

5
INSTALLATION
10
HOW TO OPERATE THE MONITOR
POWER
Releasing the Monitor
P u s h t h e o p e n b u t t o n ( l o c a t e d o n t h e f r o n t e d g e o f t h e s c r e e n h o u s i n g )
a n d l o w e r t h e m o n i t o r t o t h e d e s i r e d a n g l e . Yo u c a n a l s o a d j u s t t h e
s w i v e l a n g l e .
How to watch the monitor
UNIT REMOTE CONTROLLER
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
3. Turn on the external devices and view.
Make this arrow in DOWN
direction only.
PULL BUTTON
POWER
1. Open the package and check that these items are presents.
INSTALLATION PLATE UNIT SCREW A SCREW B
2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 9)
3.Match the position of installation bracket and
installation plate with screw A.
4. Tighten the unit with the supplied
screw B.