Furuno 1623 User Manual

Page 31

Advertising
background image

3. INSTALLATION

24

7. Referring to the figure below, fasten the

shield cable with a screw (M4 x 10) on the
chassis to ground the unit.

Connect 9 pin
connector
here (J801).

Connect
shield here.

How to connect the antenna cable

to the antenna unit

8. Attach the EMI core to the antenna cable.

Set the EMI core fixing plate to the EMI
core.

Pass the cable through the plate
so the bend faces downward.

EMI core fixing plate

9. Connect the 9-pin connector of the

antenna cable to J801. See the illustration
above for location.

10. Refasten the shield plate with 10 screws.

Be sure not to pinch the cable from the
rotation detector with the shield plate.

11. Fasten the EMI core fixing plate with

screw (supplied).

Screw (M4 x 15)

EMI Core

EMI Core
Fixing Plate

Align bend with
corner of chassis.

How to fix the EMI core

12. Temporarily close the cover. You will need

to open the cover later to confirm
magnetron voltage.

Mounting using the optional mounting
bracket

A mounting bracket for fastening the antenna
unit to a mast (70-125 mm diameter) on a
sailboat is optionally available (Type OP03-93,
Code 008-445-080).

Contents of mounting bracket kit

Name Type

Code

No.

Qty

Bolt M4

x

12 000-804-725

4

Bolt M8

x

20 000-805-707

8

Mounting

plate

03-018-9001-0 100-206-740 1

Support

plate (1)

03-018-9005-0 100-206-780 1

Support

plate (2)

03-018-9006-0 100-206-790 1

Bracket (1)

03-028-9101-0

100-206-810

1

Bracket (2)

03-028-9102-0

100-206-820

1

Fixing plate

03-028-9103-0

100-206-830

2

1. Remove mounting hardware at the

bottom of the antenna base. You may
discard the mounting hardware.

2. Assemble the mounting bracket as below

and fasten it to a mast.

3. Fasten the antenna unit to the mounting

bracket with hexagon head bolts (M10 x
25, optional supply).

Mounting plate

Support
plate (1)

Support
plate (2)

Bracket (1)

Bracket (2)

Fixing plate

M8 x 20

M8 x 20

(A) Assembling the mounting bracket

M4 x 12

(B) Fastening antenna to mounting bracket

M10 x 25

M8 x 20

How to assemble the optional mounting

bracket and mount the antenna

Advertising