Adjusting the direction of air circulation, En-10 – Friedrich P/N9359944072-01 User Manual

Page 11

Advertising
background image

En-10

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Vertical (up-down) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION VERTICAL SET
button. Horizontal (right-left) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION
HORIZONTAL SET button.

Vertical Air Direction Adjustment

Press the AIR FLOW DIRECTION VERTICAL SET button.

Each time the button is pressed, the air direction range will change as follows:

1

2

3

4

5

6

7

Types of Air flow Direction Setting:
1,2,3,4

:

During Cooling/Dry Modes

5,6,7

:

* During Heating mode

The remote control unit’s display does
not change.

Fig. 7

● Use the air direction adjustments within the ranges shown above.
● The vertical airflow direction is set automatically as shown, in accordance with

the type of operation selected.

During Cooling/Dry mode : Horizontal flow 1

* During Heating mode

: Downward flow 7

● During AUTO mode operation, for the first minute after beginning operation,

airflow will be horizontal 1; the air direction cannot be adjusted during this pe-
riod.

Horizontal Air Direction Adjustment

Press the AIR FLOW DIRECTION HORIZONTAL SET button.

Each time the button is pressed, the air direction range will change as follows:

1

2

3

4

5

The remote control unit’s display does
not change.

● Use the air direction adjustments within the ranges shown above.

Fig. 8

DANGER!

Never place fingers or foreign objects inside

the outlet ports, since the internal fan oper-

ates at high speed and could cause personal

injury.

● Always use the remote control unit’s

AIR FLOW DIRECTION button to adjust

the UP/DOWN air direction flaps or

RIGHT/LEFT air direction louvers. At-

tempting to move them manually

could result in improper operation; in

this case, stop operation and restart.

The louvers should begin to operate

properly again.

● During use of the Cooling and Dry

modes, do not set the UP/DOWN air

direction flaps in the Heating range (5

to 7) for long periods of time, since

water vapor may condense near the

outlet louvers and drops of water may

drip from the air conditioner.

● When used in a room with infants, chil-

dren, elderly or sick persons, the air

direction and room temperature

should be considered carefully when

making settings.

Example: When set to vertical air direc-

tion

Example: When set to horizontal air di-

rection

RIGHT/LEFT air direction louvers

9359944072-01_OM_en.p65

1/21/10, 1:51 PM

10

Advertising