FUJITSU fi-4110EOX2 - Manual (Page 21)

2.1 Installing ScanSnap!
ScanSnap! fi-4110EOX2 Operator's Guide
5
CONNECTING ScanSnap!
2
2.1 Installing ScanSnap!
"Installation" is the operation of copying the program files supplied with ScanSnap! to the hard
disk of the personal computer you are using, and creating the environment for using ScanSnap! on
the personal computer on which the ScanSnap! program files are installed.
■ Before Installing ScanSnap!
Make the following preparations before you install ScanSnap!.
1. Check the system.
ScanSnap! runs on the following system:
■ Personal computer
• Intel ®
Pentium
®
III processor, clock speed 600 MHz or higher is recommended as the
CPU.
• CD-ROM drive (required for installation)
• USB port
■ Operating system
• Windows ®
98
• Windows ®
Me
• Windows ®
2000
• Windows ® XP or one of the above
■ RAM
64 Mbytes or more (128 Mbytes or more recommended)
■ Free disk space
• ScanSnap! Driver 10 Mbytes
• CardMinder TM
100 Mbytes
2. Make sure that ScanSnap! is disconnected from your personal computer.
3. Start up your personal computer.
When using Windows
®
2000 or Windows
®
XP, log in as a user having "Administrator"
privileges (computer administrator privileges in the case of Microsoft
®
Windows
®
XP
Home Edition operation system).
ATTENTION
v
ScanSnap! sometimes does not function if the USB port on the keyboard or
monitor is used.
If you are using a commercially available USB hub, use a type that has an AC
adapter.