FUJITSU ScanSnap Upgrade P2WW-1860-01EN Scanner - Manual (Page 41)

37
4.3.2. “Create front and back images separately”
This mode is for scanning documents such as photographs that you do not want to scratch, or clippings of
information that are difficult to be loaded.
1. Right-click “ScanSnap Manager” icon
on the task bar, and select “Carrier
Sheet...”
2. On the “Carrier Sheet Settings” window,
select “Create front and back images
separately” on “Mode” and click the
[OK] button.
3. Open the Carrier Sheet and place the
document inside.
Align the top of the document so that it touches the
top of the Carrier Sheet.
Place the document on its width in the center, in order
not to protrude out of the Carrier Sheet.