Outdoor Great Room Fire Magic 25326-016 User Manual
Page 2
2
4
2
1
3
9 F
9 C
9 D
9 B
9 A
9 E
6
10
11
8
5
7
9
SIDEBURNER PARTS LIST
Your Fire Magic Sideburner is designed to complement
your Fire Magic Barbecue. It provides a convenient,
efficient cooking surface for side dishes that require
bottom heat only.
TOOLS REQUIRED: A pair of wrenches, pliers or vice
grips for the gas connection.
CODE AND SUPPLY REQUIREMENTS: This burner
must be installed in accordance with local codes and
ordinances or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1.
This appliance and its individual shutoff valve must be
disconnected from the gas supply piping system when
testing the system at pressures in excess of 1/2 psig.
The appliance must be isolated from the gas supply piping
system by closing its individual manual shutoff valve
during any pressure testing of the gas supply system at
pressures up to and including 1/2 psig.
WHERE TO INSTALL YOUR SIDEBURNER
Fire Magic Sideburners are designed for outdoor use
only.
WARNING: Sideburners must be installed in masonry or
other type of fireproof enclosure. The unit is not insulated
and therefore must be installed with 18" of side and back
clearance from unprotected combustible materials such
as wood, plastic, or stucco with wood framing. Do not
install under overhead unprotected flammable
construction. A 4" clearance to any back wall is required
to open the lid properly.
This is a drop-in type unit. The unit must be
removable for gas hookup, servicing and burner
adjustment.
PROPER VENTILATION: Proper ventilation of your
sideburner must be maintained to ensure proper
performance. Do not operate with lid closed.
VENTILATION OF ENCLOSURES
When using propane gas, take EXTREME CAUTION to
ensure ample ventilation of gas vapor. Propane vapor is
invisible and heavier than air. A DANGEROUS
EXPLOSION could occur, resulting in SERIOUS INJURY,
OR LOSS OF LIFE if propane gas is allowed to accumulate
and then ignite.
PREPARING FOR INSTALLATION OF YOUR FIRE MAGIC SIDE BURNER
1.
3275-06
Handle assembly
2.
3275-04
Lid, porcelain
OR 3280-04
Lid, S.S.
3.
3275-26
Lid stop (2)
4.
3275-10
Burner grid
5.
3005
Valve, w/o knob
6.
3020
Knob
7.
3275-39
Valve manifold assembly
8.
3275-35
Gas connector tube
9.
3275-32
Side burner assembly, complete
Comprising of:
9A
Orifice housing
9B
Ignitor electrode
9C
Venturi tube
9D
Lock nut
9E
Burner base
9F
Burner cap
10.
3001-49-1
Burner orifice, nat gas #49
OR 3001-56-1
Propane gas #56
11.
3199-32
Ignitor spark generator
Item
Part
Description(Qty.)
No.
No.