Т³гж 13, Replacement instructions, Replacing the headlight lamp – Fantom Vacuum FM742H User Manual
REPLACING THE HEADLIGHT LAMP
Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the
power cord from the wall outlet before replacing any of the parts below.
Set the vacuum cleaner to the parallel position.
Loosen the screws to remove the lens.
When removing the headlight lamp, be careful
not to pull on the headlight lamp wiring.
Remove the lamp by pushing it gently in
the direction of the arrow and then turning
Push a new lamp gently into the socket and
turn it clockwise to tighten it .
Use a standard bayonet base appliance lamp
rated at 120V and 15W (LAMP MAX.15W).
Caution: Be careful not to clamp the
headlight lamp wiring.
Reattach the lens and fasten the screws.