FUJITSU M4097D - Manual (Page 28)

2-8
Cleaning the Pick Arm Rollers
1
Pull the ADF lever to open the
ADF.
2
Moisten a cotton swab or Dry
cloth with F1 or F2 Cleaner.
3
Wipe the small Plastic rollers
at the tip of the Pick Arm.
4
Wipe the small Plastic rollers
and the Pick Arm with a clean,
dry cloth to dry them.
NOTE
When non-carbon paper is used, the Pick Arm rollers may become dirty with a black substance. Use Cleaner
F2 to remove the contamination.
CAUTION
1. Don’t wipe the pad rubbers with the F2 cleaner.
2. Don’t apply the F2 cleaner to the pad rubber.