FUJITSU LT800P User Manual
Page 91
89
U s i n g t h e W i r e l e s s L A N
Other computers
are not displayed
when the [Network
Computer] icon is
double-clicked.
(continued)
The TCP/IP
protocol is not
installed, or, the IP
address is not set
correctly.
If the TCP/IP protocol is installed, do the
following to check the IP address:
1. Windows 2000:
Click [Start] -> [Programs] -> [Acces-
sories] -> [Command Prompt].
Windows XP:
Click [Start] -> [All Programs] ->
[Accessories] -> [Command Prompt].
2. Enter “IPCONFIG” command, and
press [Enter].
(If your hard disk is C drive, enter
C:\>ipconfig)
Check that the IP address is correctly
displayed under the IP Address.
Example:
IP address: 10.0.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
No communication
due to poor radio
signal.
Shorten the distance between computers
or remove visible obstacles between them,
and retry the connection.
Problem
Possible Cause
Possible Solution
58-0867-01.book Page 89 Thursday, February 13, 2003 1:18 PM