Fisher-Price POWER WHEELS T4963 - Manual (Page 12)

12 T4963a-0921
Battery
Retainer
Battery
• Place the battery retainer over the battery.
• Replace the screw through the end of the battery
retainer and into the vehicle.
• Tighten the screw.
4
IMPORTANT! Use only a Power Wheels ® 6 volt
(4.0 Amp/Hr) rechargeable battery. Use of any other
battery will damage your vehicle.
• Loosen the screw in the battery retainer and remove it.
• Loosen the screws located on the back end of the seat.
• Lift and remove the seat from the vehicle.
6 Volt
Battery
Battery
Compartment
• Fit the Power Wheels ® 6 volt (4.0 Amp/Hr) battery
inside the battery compartment with the wires facing
towards the rear of the vehicle.
BATTERY INSTALLATION
1
3
2
Seat
Screws
Battery
Retainer