Furman Sound SRM-80A - Manual (Page 2)

F u r m a n S o u n d , I n c . l 1 9 9 7 S . M c D o w e l l B l v d . l P e t a l u m a , C A 9 4 9 5 4 - 6 9 1 9
P h o n e : 7 0 7 . 7 6 3 . 1 0 1 0 l Fa x : 7 0 7 . 7 6 3 . 1 3 1 0 l w w w. f u r m a n s o u n d . c o m
DESCRIPTION
(CONTINUED)
as you need.
Need to make copies or dub between any of
the 4 mix-down recorders? The SRM-80A has
it covered. Route signals between any of the 4
Mix-down decks with the simple turn of a switch.
Additionally the SRM-80A allows you to adjust
your listening volume without altering the
signal level going to your mix-down recorder or
between any of the Mix recorders when dubbing
or making copies.
Accurate metering is handled by high quality
40 segment LED meters. Meter ballistics can
be selected to show Average level or Peak level
which includes Peak hold.
Speaker Select buttons include a volume trim
pot so that the different Monitor speakers can
be adjusted to equal volume. This allows you to
do comparisons between the different monitor
speakers without needing to readjust the level
manually.
The unique “Power amp sharing” function of
the SRM-80A allows you to plug the speaker
outputs from a conventional power amp into the
back panel of the SRM-80A and drive 2 sets of
passive, non powered monitor speakers from
that single amplifi er.
Mono sum button on front panel allows you to
do a quick mono check for identifying phasing
MONO and DIM. An LED
indicator is provided for
each button
and a 10 foot cable is
included
SRM-80A SPECIFICATIONS
LINE IN/OUT
Input Im ped anc es:
Source 24 Kohms
A Input 24 Kohms
B Input 40 Kohms
C Input 40 Kohms
D Input 40 Kohms
Output Impedances:
A Output 50 ohms
To Power Amp 50 ohms
B,C,D Output: <50 ohms
Sensitivity for 0 VU: 0 dBu (.775 Vrms)
or +4 dBu (1.23 Vrms)
Max. Through Input Level: +21 dBu (8.7 Vrms)
Max. Output Level: +27dBu (17.34Vrms)
MONITOR OUTPUTS
Noise: <-95dBu, 20Hz to 20kHz.
THD + N: 0.003% maximum
Crosstalk: -83dB minimum @ 10kHz
Connectors: Balanced TRS input and
output jacks sends. RCA
jacks for “B”, “C”, and “D”
inputs and outputs.
HEADPHONE OUTPUT
Output Impedance: 56 ohms
THD + N: 0.001% with 750mW driving a
150 ohm load.
POWER AMP
Output Impedance: 50 ohms
Connectors: 1/4” TRS balanced
SPEAKER OUTPUT SWITCHING 8A/240V
Connectors: Power amp and speaker
connectors: 5-way binding