Fisher & Paykel GC912M - Manual (Page 14)

GC912 models
The wok grate goes in the center over
the wok burner. The other two grates are
interchangeable.
GC36 models
The grates above the wok burner are different
from the other burners.
Care and cleaning
Re-assembling your wok burner (GC912M Iridium models only)
Each part of your wok burner has locating pins to help you to assemble it correctly after cleaning.
Incorrect assembly can cause dangerous irregular flames and ignition problems. Refer to this
diagram for the correct order of assembly. Note: The brass parts of your wok burner will change
color with use. This will have no effect on the performance.
Rotate vent ring to align locater
pin with hole in burner base.
Inner cap
Outer cap (small holes)
Trim ring
Vent ring with locater pins
(large holes)
Align and insert pin
Side view
Correct grate orientation - GC912 models
Rounded corners
Correct grate orientation - GC36 models
12