FujiFilm F601 - Manual (Page 49)

96 97
5
● ! For the LCD BRIGHTNESS, VOLUME, DATE/TIME
and RESET ALL settings, press “c” to switch to the
settings screen.
1Press the “MENU/OK” button to display the
menu screen.
2Select “ g ” SET–UP.
3Press the “MENU/OK” button.
1Use “a” and “b” to select the menu option.
Use “d” and “c” to change the setting.
2Once you have changed the setting, press the
“MENU/OK” button.
1 2 0 3 0 2 0 1
0 1 0 2
118
■ SET–UP Menu Options
Settings Display Explanation
IMAGE DISPLAY
USB MODE
AUTO POWER OFF
DATE/TIME
OFF/POSTVIEW/
PREVIEW
DSC/PC CAM
2MIN/5MIN/OFF
: SET
Use this option to specify whether the Preview screen (the
photographed image) is displayed after you take a shot. See
P.98 for details.
See P.102 for details.
Use this option to specify whether the camera's power
consumption is reduced and the camera is subsequently switched
off automatically when it is not being used. See P.100 for details.
Use this option to correct the date or time. See P.15 for details.
Factory
default
OFF
DSC
2MIN
—
q LCD ON/OFF
Use this option to specify whether the LCD monitor is automatically
switched ON or OFF when the Mode dial is set to “
q ”.
ON
VOLUME : SET Use this option to adjust the volume. See P.101 for details. —
LCD BRIGHTNESS : SET
Use this option to adjust the LCD monitor brightness. See P.101
for details.
—
BEEP F LOW/HIGH/OFF
Sets the volume of the beep that sounds when the camera
controls are used.
LOW
RESET ALL : OK
This resets all camera settings (including the photography and
playback menu settings) other than the date and time to the
factory default values set at shipment. When you press “c”, a
confirmation screen appears. To proceed, press the
“MENU/OK” button again.
—
LANGUAGE
ENGLISH/FRANCAIS/
DEUTSCH
Select English, French or German as the language used for
screen display.
ENGLISH
●
! This screen shows the photography menu.
g USING THE SET–UP MENU