Fortinet DS35 - Manual (Page 8)

DS-Series Coax Speakers
Wiring Options
Wiring
Hooking up the supplied wires to your Kicker DS-Series Coax Speakers is easy. The end of each wire is terminated with a large
and a small connector. The larger connector is crimped to the gray wire and connects to the larger positive terminal of the speaker.
The smaller connector is crimped to the black wire and connects to the smaller negative terminal of the speaker. The other end of
these wires connect to your source unit or amplifier in a similar manner. The gray wire connects to the positive output of the amplifier
or source unit. The black wire connects to the negative output of the amplifier or source unit. These connections can be made with
the crimp-down style connectors, or with solder and heat shrink or electrical tape to prevent electrical shorting of the speakers.
Note: To get the best performance from your Kicker DS-Series Coax Speakers, we recommend using genuine Kicker Accessories
and Wiring.
If you have any questions about the installation of your Kicker DS-Series Coax Speakers, see the Authorized Kicker Dealer where you
made your purchase. For more advice on installation, click on the SUPPORT tab on the Kicker homepage, www.kicker.com. Choose
the Technical Support tab, choose subject you are interested in, and then download or view the corresponding information. Please
E-mail [email protected] or call Technical Services (405) 624-8583 for specific or unanswered questions.
SOURCE UNIT or AMPLIFIER
Other
Channel
Installa
tion
8