Furuno MU-170C - Manual (Page 15)

8
Menu item Function Available range
H_SIZE
Adjusts the image size horizontally.
Horizontal size: Narrow (◄) ↔ Wide (►)
V_SIZE
Adjusts the image size vertically.
Vertical size: Narrow (◄) ↔ Wide (►)
Variable depending on
signal type
PHASE**
Adjusts the timing of sampling so that the flicker
disappears and the text is clear.
1-32
CONTRAST
Increases or decreases contrast level.
Dark (◄) ↔ Bright (►)
1-64
H_POSITION
Moves the image position horizontally.
To the left (◄) ↔ To the right (►) 1-99 (RGB1, 2),
1-50 (DVI)
V_POSITION
Moves the image position vertically.
Up (◄) ↔ Down (►)
1-40
R_LEVEL
Adjusts red color level.
Weak (◄) ↔ Strong (►)
1-64
G_LEVEL
Adjusts green color level.
Weak (◄) ↔ Strong (►)
1-64
B_LEVEL
Adjusts blue color level.
Weak (◄) ↔ Strong (►)
1-64
TEMPERATURE
Adjusts color temperature.
5500K/6500K/7000K/8000K
Warm color ↔ Cold color
5500K/6500K/7000K/8000K
B STRETCH
Emphasizes black color.
Standard (OFF, ◄) ↔ Dark (►)
OFF, 1-10
W STRETCH
Emphasizes white color.
Standard (OFF, ◄) ↔ Bright (►)
OFF, 1-10
DISP MODE
Selects the signal resolution.
FULL: Shows the input signal on entire screen.
EVEN: Shows the input signal with original size.
NORMAL: Shows the input signal with same
aspect ratio.
FULL/EVEN/NORMAL*
SHARPNESS**
Sharpens the edge horizontally.
Softens characters and lines. (◄)
↔ Sharpens characters and lines. (►)
1-10
*: When inputting VGA, SVGA or XGA, a circle may be displayed as an ellipse because the
aspect ratio differs. In this case, select NORMAL from the DISP MODE menu item on the
RGB1, 2 or DVI menus. The top and bottom on the screen are left blank, but this is
normal.
**: If the characters are not clear, adjust PHASE and SHARPNESS.