Related information, Install the hard drive backplane – FUJITSU SPARC T5120 User Manual

Page 180

Advertising
background image

154

SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009

FIGURE:

Removing a Hard Drive Backplane (Illustrating removal from a SPARC
Enterprise T5220 server)

3. Slide the backplane down and off the hard drive cage retention hooks.

4. Place the hard drive backplane on an antistatic mat.

Related Information

■

“Install the Hard Drive Backplane” on page 154

▼ Install the Hard Drive Backplane

1. Slide the backplane under the retention hooks on the hard drive cage.

2. Install the No. 1 Phillips screws that secure the backplane to the hard drive

cage.

■

Two screws secure the backplane in the SPARC Enterprise T5120 server. See the
first figure below.

■

Four screws secure the backplane in the SPARC Enterprise T5220 server. See the
second figure below.

Advertising
This manual is related to the following products: