Furuno FR-8122 EU User Manual
Page 113
APPENDIX
A-4
Initial
Factory
Installation (For use by the installer. Not accessible by user.)
Sector
Blank 1,
Sector
Blank 2
Key Beep (Off,
On)
Range Unit (
nm, km, sm)
Alarm Level (Low,
Med, High)
Antenna Rotation (
Rotate, Stop)
Shift Speed (1-99(kt),
15)
STBY Mode Display (
Normal, Nav, Economy)
Bearing Source (Magnetic,
True)
Range Preset (
0.125, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 6, 8, 12, 16,
24, 36, 48, 64, 72, 96*
2
(nm))
Ship Speed Unit (
kt, km/h, mph)
Depth Unit (m,
ft, fa, pb, HR)
Temperature Unit (
°
C,
°
F)
Wind Direction (
Apparent, True)
Wind Speed Unit (
kt, km/h, mph, m/s)
Port1 (
Auto, 4800bps, 38400bps)
Port2 (
Auto, 4800bps, 38400bps)
Through Output (
Off, On)
Test
LCD Pattern
Sector Status (
Off, On)
Sector Start (0-359(deg),
0)
Sector Area (0-180(deg),
0)
System
Mode (GPS,
WAAS, DGPS)
Datum (
WGS-84, Tokyo, Other)
Datum Number (001-254,
001)
WAAS (
Auto, Manual)
WAAS Number (120-150,
120)
GPS Self Test
Satellite Monitor
Type 16 Message
Forward Offset (-999 - +999(m),
0)
Right Offset (-999 - +999(m),
0)
Cold Start
GPS*
1
(Continued from previous page)
*
1
Requires GPS receiver.
*
2
FR-8252 only