Hardware connections – FieldServer FS-8704-07 User Manual
Page 4
Advertising

FS-8704-07 Allen Bradley PCCC (TCP/IP) Driver Manual
Page 4 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
3
HARDWARE CONNECTIONS
Make sure the device IP_address is configured to be on the same IP network as the FieldServer. Use a crossover
cable if the FieldServer is connected directly to the PLC device. Use a straight cable if the FieldServer is connected
to a hub.
Configure the PLC according to manufacturer’s instructions
FieldServer
FieldServer Part #
8915-10
UTP cable
Connect to an Ethernet Port
on the FieldServer
N1
1
8
Hub/Router
Allen Bradley PCCC
(TCP/IP)
Advertising