Furuno FCV-1150 - Manual (Page 21)

12
1. At the transducer setting screen, confirm that "XDCR Select" is set to "XDCR Type" (default
setting).
Transducer setting screen
2. If a high frequency transducer is fitted, press T to select "HF Connection" and then press the
ENTER key.
3. Press S to select "Connected" and then press the ENTER key.
4. Press T to select "Freq" and then press the ENTER key.
5. Press T or S to select the transducer frequency and then press the ENTER key.
Connected
Not connected