Fisher-Price LIL KAWASAKI 76937 - Manual (Page 10)

10
7
• Position the handlebar upright.
• Fit a handgrip onto one end of the handlebar.
Helpful Hint: If the handgrip is difficult to slide onto the
handlebar, moisten the handgrip with warm water before
fitting it onto the handlebar.
• Repeat this procedure to fit the other handgrip onto
the handlebar.
Handlebar
Handgrip
Steering
Column
Steering Column
Bushing
• Wipe the steering column with a paper towel to remove
any dirt or oils.
• Fit the steering column bushing onto the straight end of
the steering column.
9
• Insert the curved end of the steering column through the
rectangular opening in the vehicle body.
• Rotate the steering column bushing 1 /
4
turn and fit it into
the rectangular opening in the vehicle body.
Vehicle Body
Rectangular
Opening
Steering Column
Bushing
10
• Insert the connector end of the handlebar wire harness
into the rectangular opening in the handlebar.
• Feed the handlebar wire harness through the handlebar.
• Push firmly on the button end of the handlebar wire
harness to snap into the rectangular opening.
Button End Connector
End
5
Bottom View
6
• Turn the handlebar upside down.
• Align the handlebar wire harness with the guides on the
underside of the handlebar.
• Push firmly on the handlebar wire harness near each of
the guides to secure the wire in the underside of the
handlebar.
Handlebar
Wire Harness
Assembly
Handlebar
Guides
FUEL E F
RPM x 100
FUEL E F
RPM x 100
8
• Apply labels #7 and #8 to the handlebar, as shown.
7 8
Steering
Column