FUJITSU PRIMERGY BX600 - Manual (Page 162)

Device Configuration Commands Command Reference
Intelligent Blade Panel Module
161
7.4.6.1 Show Commands
This command display the port group information.
Syntax
show port-group [<portGroupName>]
<portGroupName> - The name of a port group which user want to display.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port Group Name: This indicates the name of port group.
Internal Ports: . List the internal port members
Uplink Set Name:
The name of the uplink set.
External Ports: List the external ports of the port group.
7.4.6.2 Configuration Commands
7.4.6.2.1 port-group
This command is used to create or delete an port group.
Syntax
port-group <portGroupName>
no port-group <portGroupName>
<portGroupName> -
A string associated with port group as a convenience. It can be up to
32 alphanumeric characters, and can not be blank.
no -
This command deletes an existing port group.
Default Setting
None
Command Mode
Global Config
This command is used to add or remove a port to/form a port group.