Installing a non-hot-plug expansion card – FUJITSU PRIMERGY RX600 S5 User Manual
Page 125
RX600 S5
Operating Manual
125
CSS components
Non-hot-plug components
8.2.2.2
Installing a non-hot-plug expansion card
Figure 41: Inserting the new expansion card in the removal tool
Ê
Insert the new expansion card in the provided slot (see oval in figure above)
of the removal tool.
Ê
Insert the green engaging hooks (see circles in figure above) in the rods and
push them down until they engage in the upper edge of the expansion card.
V
CAUTION!
Make sure that the ports on the expansion card are not blocked by the
engaging hooks.
Ê
Insert the expansion card fastened to the removal tool in the PCI slot.
Ê
Close the slot lock (see
) by folding it down. Make sure
that the slot lock engages.
Ê
If necessary, connect the cables on the expansion card.
Ê
Close the server (see