FUJITSU B-2566 User Manual

Page 6

Advertising
background image

6

L i f e B o o k B S e r i e s B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA
devices are installed.

Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may or may not be displayed.

Figure 2. Primary Master Submenu

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Type:

Auto
None
Hard Disk

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type auto-
matically identified by the BIOS at POST. If None is selected, all of the
following Set-up items do not appear. If Hard Disk is selected, you
must specify the number of Cylinders, Heads, and Sectors for the
drive. Select ATAPI Removable if a removable disk drive is installed at
this connection.

Cylinders:

A number

between 0

and 65,535

–—

This item appears only when the type is identifed as Hard Disk. When
Hard Disk is selected, you can change the value. This field is changed
by incrementing (pressing the [Spacebar]) or by typing in the number.

Heads:

A number

between 1

and 16

–—

TThis item appears only when the type is identifed as Auto or Hard
Disk. When Hard Disk is selected, you can change the value. This field
is changed by incrementing (pressing the [Spacebar]) or by typing in
the number.

PhoenixBIOS Setup Utility

F1

Help

ESC

Exit

Select Item

Select Menu

-/Space

Change Values

Enter

Select Sub-Menu

F9

Setup Defaults

F10

Save and Exit

Main Advanced Security Power Boot

Info

Exit

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Primary Master [TOSHIBA MK2016GAP-(PM)]

Type:

[

Hard Disk

]

Cylinders:

[16383]

Heads:

[16]

Sectors:

[63]

Maximum Capacity:

8455MB

Multi-Sector Transfers:

[16 Sectors]

LBA Mode Control:

[Enabled]

PIO Transfer Mode:

[FAST PIO 4]

DMA Transfer Mode:

[Ultra DMA 2]

Quilt-3 BIOS.fm Page 6 Monday, November 12, 2001 10:32 AM

Advertising
This manual is related to the following products: