FUJITSU Sparc Enterprise Server T5440 - Manual (Page 45)

Manage the System 29
2. At the ILOM -> prompt, type:
This command displays the fault ID, the faulted FRU device, and the fault
message to standard output. The show /SP/faultmgmt command also displays
POST results.
For example:
Related Information
■ “Clearing Faults” on page 33
■ “Bypassing Minor Faults” on page 31
■ “Managing Devices” on page 34
■ “Locate the System” on page 30
▼ Run Full POST Diagnostics on Reset
Running full POST diagnostics can take a significant amount of time at system reset.
Use this diagnotic setting for troubleshooting purposes, then return to your normal
diagnostic setting for regular operation.
1. Log in to ILOM.
See “Log In to ILOM” on page 28 .
-> show /SP/faultmgmt
-> show /SP/faultmgmt
/SP/faultmgmt
Targets:
0 (/SYS/PS1)
Properties:
Commands:
cd
show
->