FUNAI WV13D5 - Manual (Page 23)

- 23 - EN
SPECIAL PLAYBACK FUNCTION
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, press [REPEAT]
during playback.
¡ The repeat mode changes as described below every
time you press the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat) (repeat off)
NOTES:
¡ Repeat Title/Chapter is not available with some
scenes.
¡ The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, press [REPEAT]
during playback.
¡ The repeat mode changes as described below every
time you press the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat) (repeat off)
NOTES:
¡ Repeat Track setting will be cleared when moving
to other track.
¡ Repeat playback does not function during A-B
repeat playback.
A-B REPEAT
1 Press [A-B] at your chosen starting point.
¡ “ A-” appears briefly on the TV screen.
2 Press [A-B] again at your chosen end point.
¡ “ A-B” appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, press [A-B].
NOTES:
¡ The A-B repeat section can only be set within the
current title (for DVDs) or current track (for Audio
CDs).
¡ A-B repeat is not available with some scenes in
DVD.
¡ To cancel the A point which was set, press
[CLEAR].
¡ A-B repeat playback does not function during title,
chapter, track or all repeat playback.
CD DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In the stop mode, press [MODE].
¡ The “PROGRAM” screen will appear.
2 Press [ K K/L L ] to select a track, then press
[ENTER].
¡ Press [CLEAR] to erase the
most recently entered track.
¡ If the entire Program cannot be
displayed at once on a screen,
“ G” appears to go to the next
page and “ H” appears to go
back to the previous page.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Press [PLAY O] to play the programmed
tracks.
NOTES:
¡ While the program is being played back, pressing
[STOP C] works as follows.
¡ Press [STOP C] once and then [PLAY O] again,
playback will restart from the point where
[STOP C] was pressed. (Program continued)
¡ Press [STOP C] twice and then [PLAY O] again,
playback will restart from the track in the usual
way. (Program canceled)
¡ Up to 99 tracks can be entered.
¡ To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡ If you like to repeat the current track in the program,
press [REPEAT] several times until “
TRACK”
appears during playback. If you like to repeat the
entire program press [REPEAT] several times until
“
ALL” appears during playback.
CD
TOTAL 1:03:30
2/3 1/4
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1 3:30
1 3:30
CD-DA
ENTER
CLEAR
PLAY
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
PROGRAM
RANDOM PLAYBACK
This function shuffles the playing order of tracks
instead of playback in the sequence.
1 In the stop mode, press [MODE] twice.
¡ “RANDOM” screen appears.
2 Press [PLAY O] to start random playback.
NOTE:
¡ If you like to repeat the current track in the random
selection, press [REPEAT] several times until
“ TRACK” appears during playback. If you like
to repeat the entire random selection press
[REPEAT] several times until “
ALL” appears
during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM