Freecom Technologies Media Player II - Manual (Page 19)

19
Basic operation
EN

Follow the instructions as shown in the above picture and connect the device to PC.
Power on the PC and enter the system. The PC detects the device automatically and then
the device can be used as an external USB storage device. After data transfer is finished,
please remove the USB storage device safely (click the USB device icon to stop the USB
device and then pull out the USB cable).
Notes:
1. Please don’t power off when the device is busy (reading/writing data).
. If there is no USB detected after connecting the USB cable to the PC pull
off the USB cable, wait about 10 seconds and then connect it again.