FUJITSU Image Scanner fi-5650C - Manual (Page 27)

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Loading documents onto the ADF
2.3 Scanning documents
2.4 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.2 Loading documents onto the ADF
1. Confirm the following items before loading documents
❍ All the documents have the same width
❍ Check the number of sheets in the document stack.
The standard of number of sheets that can be loaded on the scanner is as follows:
A4-size paper or smaller:
20 mm or less.
Note: 200 sheets at in 80g/m2.
Over A4-size paper:
10 mm or less.
Note: 100 sheets at 80g/m2.
For details on loading documents sheets, refer to Chapter 8 DOCUMENT SPECIFICATION OF ADF .
1 | 2 | 3 | 4 | 5 | 6
All Rights Reserved, Copyright (C) PFU LIMITED 2004