Furuno DD-80 - Manual (Page 43)

5 – 5
Skipping route waypoints
You may skip route waypoints by displaying
"DI" (DIsable) next to the route waypoint in
the route list. Using Figure 5-14 as an ex-
ample, your ship is currently heading toward
waypoint 04 but is to switch course and head
to waypoint 03. In this case you would want
to skip waypoint 04.
,,
,,
,,
,,
,,,
,,,
,,,
,,,
Waypoint 03
Waypoint 05
Port A
Port B
Waypoint 01
Waypoint 02
Waypoint 04
Waypoint 06
New course
Figure 5-14
1) Press [WPT RTE] and [5] to display the
route list. Press the cursor keys to select
route.
ROUTE :01
ENT:Enter MENU:Escape
(In Use, REVERSE)
skip Distance TTG
001
003 36° 12.345' N 135° 23.456' E
A POINT APR 10' 95 13:45U
: RTE WPT CLEAR: Delete
Trial Speed Auto Man (012.0kt)
01 0 04 EN
02 0 03 EN 345.67nm 2D 12H 34M
34° 12.345' N 130° 23.456' E
MARINE POINT APR 10' 95 12:35U 004
01 0
"EN" indicates waypoint
is enabled. Display "DI"
to skip waypoint.
nm D M H
Figure 5-15 Route list
2) Press ▲ or ▼ to select route waypoint to
skip.
3) Press t or s to shift the cursor to the
right of the waypoint number.
4) Press [ ] to change "EN"(ENable) to
"DI"(DIsable).
5) Press the [NU/CU ENT] key.
To reselect the waypoint, select it on the route
list and press [
] to change "DI" to "EN".
Route waypoints are mutually skipped when
the navigators are sharing data.
5.2 Cancelling Destination
Destination is cancelled at both GPS naviga-
tors when they are sharing data.
1) Press the [GOTO] key.
2) Press [5] to select Cancel. The message
shown in Figure 5-16 appears.
Release GOTO ?
ENT:Yes MENU:No
Figure 5-16
3) Press the [NU/CU ENT] key.