FieldServer Telnet FS-8704-11 - Manual (Page 4)

FS-8704-11 Telnet Driver Manual Page 2 of 6
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
2. Configuring the Telnet driver
To use the Telnet driver, the configuration (*.csv) file in use must resemble the following example:
// Set up common information
FieldServer
Title
Telnet Server
Adapters
Adapter, Protocol, Username, Password, autoconnect_port, autoconnect_mode, session_timeout
N1, TLN, Joe, Secret, R1, Text, 60s
Adapters
Adapter,protocol
N1,SMT
// Set up the TLN Server side
Ports
Port Baud Parity
R1 9600 None
R2 9600 None
P1 9600 None
P2 9600 None
// examples of virtual comports
VS1 - -
VC1 - -
Note that the Telnet Driver will only be able to connect to ports that have been declared in the configuration file.