FujiFilm A310 - Manual (Page 20)

39
Advanced Features
38
f Top 4-frame Continuous Shooting
In this mode, you can shoot up to 4 frames at
intervals as short as 0.3 seconds. When you take
the shots, the photographed images are displayed
and automatically recorded.
k Final 4-frame Continuous Shooting
Continuous shooting (at a minimum interval of 0.3
seconds) starts when you press the shutter button
and the camera captures the last 4 frames shot
immediately before you release the shutter button.
If the maximum of 25 shutter operations is reached,
the last 4 frames are captured.
If there is insufficient space on the xD-Picture
Card, the camera records as many of the shots
taken just before the shutter button was released
as will fit on the xD-Picture Card.
Press shutter
button
Max. 25 shots
4 frames
Release shutter
button
● ! The time required to record a file is approximately
10 seconds in “
1 ” mode (for TOP or FINAL 4-frame
continuous shooting).
Use lock pin to lock the focus.
Starting point Point where you want to take the picture
A
A B Focus on and the focus is wrong at .
B
FAR NEAR
◆ Focusing on a Moving Subject ◆
If you press the shutter button down halfway to focus on the subject at the starting point A, the subject
may no longer be in focus when it reaches point B where you want to take the shot.
In such situations, use AF lock to focus on point B beforehand and then lock the focus so that it does
not shift (lock pin).
The lock pin feature is also useful for photographing fast-moving subjects that are difficult to focus on.
The self-timer lamp lights steadily for roughly 5
seconds and then blinks for another 5 seconds,
after which the shot is taken.
A countdown is displayed on the LCD monitor
indicating the time remaining until the picture is
taken.
Self-timer mode is automatically cancelled after
each shot.
3
4
● ! To stop the self-timer, once it has started running, press the
“BACK” button.
1 This mode can be selected in the “a ”, still
photography modes.
Select the continuous shooting mode you want to
use.
2 If you select Continuous Shooting mode (excluding
OFF), the selected mode appears on the LCD
monitor.
f: Top 4-frame Continuous Shooting
k: Final 4-frame Continuous Shooting
◆
Notes on Using the Continuous Shooting Modes
◆
h “ ∑ ” appears on the LCD monitor during shooting.
h The shots should be taken using the viewfinder.
h The results of the shot are displayed even when “IMAGE DISP.” is set to OFF (
➡P.50).
h Shooting continues for as long as you hold down the shutter button.
h If there is insufficient space on the xD-Picture Card, as many frames are shot as can be recorded on
the available space.
h The focus and exposure are determined when the first frame is shot and cannot be changed in mid-
sequence.
h The speed of continuous shooting does not change with the quality mode.
h The flash cannot be used as the flash mode is set to Suppressed Flash.
PHOTOGRAPHY MENU PHOTOGRAPHY MENU
f CONTINUOUS SHOOTING