Fortress Technologies FS-30 - Manual (Page 11)

11
TRANSMITTER PROGRAMMING
NOTE: All transmitters must be learned at the time of programming. This system can learn up to 4 remotes.
1. Turn key to the ON position and press program button 4 times.
2. After a short delay, the unit will flash the parking lights 4 times, Siren 4 times, Horn 4 times and status
LED will be on solid.
3. Press the Lock Button on the remote you wish to program.
4. You should get 2 light flashes, 2 siren chirps and 2 horn honks (optional) indicating the unit is waiting for
the second code to learn. Press button #1 and #2 together of a second transmitter, the unit will flash 3
times, 3 siren chirps and 3 horn honks. Press the lock and unlock button on a 3
rd or 4 th transmitter for up
to 4 total. Note: The unit will not flash the lights when learning the 4
th
code. Turn key off to exit
programming mode.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
IGN
OFF
COMPLETE
PRESS LOCK