Remote start error diagnostic, Alarm diagnostic – Firstech, LLC. P2W900FMR User Manual

Page 19

Advertising
background image

19

remote has been learned. The P2WSSR can recognize two remotes; 2 two-way remotes or 1 two-way
remote
and 1 one-way remote. When using 2 two-way remotes, the second remote will need to be re-
synced to the antenna prior to operation (see page 10).

Remote Start Error Diagnostic


If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following
those three flashes the parking lights will flash again corresponding to the error table. The remotes will
also display to error number, “Str ER ##” on the LCD.

Number of

Parking Light

Flashes

Remote Start Error

1 Motor

running

2

Key in ignition on position

3

Door open (manual transmission only)

4 Trunk

open

5

Foot brake on

6 Hood

open

7

Reservation off (manual transmission only)

8

Tach or voltage sensing failure


We recommend that you do not attempt any repairs on your remote starter. Contact your dealer or call
us directly.

Alarm Diagnostic

While the alarm is armed, the LED will blink slowly. While the siren is going off, the LED will indicate the
specific zone that was triggered.










Upon disarming the alarm after it has been triggered, the amount of siren chirps will indicate the specific
zone.








Priority

Situation

LED On Duty

1

Door/Hood/Trunk/Key Triggered

2 flash, rest, then repeat

2 2

nd

Shock Triggered

3 flash, rest, then repeat

3

Optional Sensor Triggered

4 flash, rest, then repeat

4

PANIC

5 flash , rest, then repeat

# of

Chirps

Situation

4

Option Sensor Triggered

5 2

nd

Shock Triggered

6 Door/Hood/Trunk/Key

Triggered

Advertising
This manual is related to the following products: