FUJITSU SPARC ENTERPRISE SERVER M9000 - Manual (Page 22)

1-10 SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010
Frequency 860 - 960 MHz †††
Write data EPCglobal GIAI-96 format ‡‡‡
Read range
(reference)
‡
1. 902 - 928 MHz
Fixed reader with a maximum output of 4 Watt EIRP: Up to 1.8 m (6 ft)
Handheld reader with a maximum output of 2 Watt EIRP: Up to 90 cm (3 ft)
2. 865.6 - 867.6 MHz
Fixed reader with a maximum output of 3.2 Watt EIRP: Up to 1.8 m (6 ft)
Handheld reader with a maximum output of 1 Watt EIRP: Up to 90 cm (3 ft)
3. 952 - 955 MHz
Fixed reader with a maximum output of 4 Watt EIRP: Up to 1.8 m (6 ft)
Handheld reader with a maximum output of 0.5 Watt EIRP: Up to 90 cm
(3 ft)
* Up to eight lanes of PCIe bus are connected to each slot.
† A built-in IOU Onboard Device Card_A (IOUA) is required for using hard disk drive. Active replacement of IOUA is not possible.
‡ The range shows the distance between a RFID tag and a RFID tag reader. The values are for reference measured with the RFID tag
reader antenna which is faced toward the RFID tag front. The read range might be shorter or longer than this value for reference, de-
pending on the sending/receiving performance (the size or the method) of the RFID tag reader antenna or the surrounding environ-
ment (interference due to the radio wave reflected by the floor, ceiling, or the indoor metallic object).
** The upper part of the M8000 server cabinet has a 12 rack units (RU) space.
††This is the maximum capacity when 8-GB dual inline memory modules (DIMM) are installed.
‡‡This interface is only used for maintenance by authorized service personnel. It does not support except the maintenance-purpose USB
devices.
***For the latest information on the operating system, visit our website, or contact your sales representative.
†††The usable frequency is defined by the government of each country.
‡‡‡It is ensured that the written data value is unique, that is, not overlapped with the values written in other RFID tags which comply
with the GIAI-96 format. This value is not the serial number of the server.
TABLE 1-1 Main Unit Specifications (Continued)
Item M8000 Server
M9000 Server
Base Cabinet Only
Base Cabinet + Expansion
Cabinet