Fisher-Price PRO 72408 - Manual (Page 2)

Replacement Instructions
3
1
• Align the four holes in the ring with the four
holes in the rim.
• Fit the new net - ring assembly into the topside
of the rim.
4
• Insert four, new screws through the underside
of the rim and into the ring.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Replacement is now complete.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
If you have further questions regarding the installation of the net - ring, please call
Fisher-Price ® Consumer Relations, toll-free at 1-800-366-1455, 8 AM-6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to:
Fisher-Price ® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
IMPORTANT! Carefully follow these instructions to replace the net - ring assembly.
Remove Old Net - Ring
• Find the four screws in the underside of the
rim. Using a Phillips screwdriver, remove the
four screws in the rim. Throw away these screws.
• Remove the old net - ring from the topside of
the rim. Throw away the old net - ring.
Assemble New Net - Ring
• Pull each net loop through a ring tab, as shown.
• Grasp the bottom of the net and pull down to be
sure all of the loops are inserted into all of the
ring tabs.
2
Printed in U.S.A. 72408pr-0921
Holes
Top View
Rim
Loop
Ring Tab
New Ring
Holes
New
Net - Ring
Rim
Rim
Front View
Old
Net - Ring
New Net - Ring
Rim