FORD 2000 Focus - Manual (Page 249)

Maintenance and care
249
If the leather cannot be completely
cleaned usinga mild soap and
water solution, the leather may be
cleaned usinga commercially
available cleaningproduct Tanners
Preserve Leather Cleaner" and a
3M Type T" scrubbingpad by
usingthe followingsteps:
The type of scrubbing pad is
very critical because the
common 3M Scotch Brite"
green pad is too aggressive and
will damage the leather surface.
• Spray a small amount of the
leather cleaner on the pad and rub
the area to be cleaned with the pad
usinga circular motion. Only clean
1/4 of the area at a time. For
heavily soiled areas, spray the
cleaner directly onto the leather
(two squirts should be adequate)
and rub with the pad. Repeat if
necessary.
• Use a soft, damp cloth to remove
the loosened dirt and foam.
• Dry with a soft cloth.