Fluke 807-0115 - Manual (Page 16)

N E T W O R K S U P E R V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To fi nd your local offi ce contact details, go to
www.fl ukenetworks.com/contact .
© 2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2006 2643152 D-ENG-N Rev A
What are ASEs?
ASEs (Analysis Service Elements) are data
collection and network performance monitor-
ing hardware devices placed on a wide area
network (WAN) or Local Area Network (LAN)
as part of the Visual UpTime Select system,
which offers in-depth, real-time, and historical
visibility into the performance of your
applications infrastructure. In the system,
data gathered by ASEs is stored in the Visual
UpTime Select server and displayed and ana-
lyzed from the Visual UpTime Select Web client.
As a service level management tool, ASEs
indicate when services are being met, provide
warnings when services start to degrade, and
send alerts when services are not met.
Hardware Warranties
Enhanced Gold, Bronze, and International
Gold ASE hardware warranty service programs
are available to help you maximize your
investment in Visual UpTime Select. For more
detailed warranty information, visit:
www.fl ukenetworks.com/visualcustomercare
Ordering Information
For more details, please contact your Visual
UpTime Select authorized reseller or
Fluke Networks Sales at (800) 240-4010
or (301) 296-2300.
X.21 inline probe ASE specifcations
General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm)
Plastic case with internal power supply
Weight 2.10 lbs.
Data Rate 0 to 2.048 Mbps synchronous
Timing Mode RD: Always synchronous with SCR
SD: Synchronous with SCT or SCTE
Environment Operating Temperature 0 o to +40 o C (+32 o to +104 o F)
Storage Temperature -20
o
to +55
o
C (-4
o
to +131
o
×F)
Clearance Requirement Minimum of 3” (7.62 cm) space on sides.
Operating and Storage
Humidity 10% to 80%, noncondensing
Power Requirements Input 100 to 240 VAC
Frequency 50/60 Hz
Input Current Rating 0.5 amps
X.21 User Interface
(DCE) Confi guration DCE for interfacing with DTE
Data and Clock Leads ITU-CCITT X.21
Signaling Leads ITU-CCITT X.21
Connector Female 15-pin X.21 connector
Signaling Indicate: Clear to Send control signal to the user
interface. Received and terminated by the ASE.
X.21 Network
Interface (DTE) Confi guration DTE for interfacing with DCE
Data and Clock Leads ITU-CCITT X.21
Signaling Leads ITU-CCITT X.21
Connector Female 15-pin X.21 connector
Signaling Control: Request to Send control signal from the
user interface. On while power is applied by the
ASE.
Serial Port Interface Baud Rate 19200 or 9600 bps
Parity 8 data bits, no parity
Stop Bit 1 stop bit
Electrical Format EIA RS-232, DTE
Connector RJ-45
Ethernet 10/100BaseT
Interface Bite Rate 10 or 100 Mbps
Connector 8-pin modular jack: RJ-48