Troubleshooting, Symptom possible causes motor does not start, Too fast of a feed rate through the cut – Festool Kapex KS 120 User Manual

Page 29: Make sure the blade is sharp, Reduce the motor speed. saw cuts are wavy

Advertising
Troubleshooting, Symptom possible causes motor does not start, Too fast of a feed rate through the cut | Make sure the blade is sharp, Reduce the motor speed. saw cuts are wavy | Festool Kapex KS 120 User Manual | Page 29 / 32 Troubleshooting, Symptom possible causes motor does not start, Too fast of a feed rate through the cut | Make sure the blade is sharp, Reduce the motor speed. saw cuts are wavy | Festool Kapex KS 120 User Manual | Page 29 / 32
Advertising
See also other documents in the category Festool Power saws: