Fisher VPC-CG6GX - Manual (Page 159)

145
English
CHECKING THE REMAINING
INTERNAL AND CARD MEMORY
You can check how many images can be captured and how much audio and video
recording time is available in the internal memory and on the card. For a table
showing the maximum number of images and recording time for the internal
memory and for specific cards, please see “Possible No. of Images/Possible
Shooting Time/Possible Recording Time” on page 180.
Checking the remaining number of images and video recording time
1
Turn on the camera (page 26).
h The remaining number of images
appears in the upper left of the monitor.
h The remaining video recording time
appears in the upper right of the
monitor.
h The remaining number of images and
video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of images
or the remaining video recording time
is “0”, you cannot capture any more
images. To capture more images,
either install a new card, or save the images to a computer and then delete
them (page 94) from the card.
h When the remaining number of images or the remaining video recording
time is “0”, it may be possible to capture a few more images by setting a
lower resolution setting (page 65), or selecting a different image quality
setting.
For audio data
1
Set the camera to the audio
recording mode (page 53).
h The remaining audio recording time is
shown.
12 00:00:58
Remaining number of images
Remaining video
recording time
12 00:16:00
Remaining recording time