Freecom Technologies MusicPal - Manual (Page 97)


EN
6
Freecom MusicPal in practical usage
6. Media server (UPnP) in connection with the Freecom MusicPal
The following tutorial explains how you can to establish a LAN or WLAN connection to
your media server (UPnP).
6..1 LAN
Use a network cable (RJ45) to create a connection between your media server (UPnP)
and the Freecom MusicPal. Start the media server (UPnP) and your Freecom MusicPal.
Configure the LAN IP in the Settings submenu. If configured in your media server
(UPnP), select Use DHCP? Yes. Otherwise select Use DHCP? No and specify your IP ad-
dress yourself. After you have configured the LAN IP, select the Media server (UPnP)
menu item in the main menu. You can find further information on networks and network
basics in the Appendix.
1. Select Settings in your main menu after you have switched on the Freecom
MusicPal. Carry out navigation by using the Navigate rotary knob. Turn to right or
left to navigate up or down through the menu. Press the right-hand knob to confirm
your selection.
2. Select the LAN IP menu item in the main menu.
3. Decide between Use DHCP? Yes or Use DHCP? No and confirm your selection by
pressing the Navigate rotary knob.
MusicPal
Internet Radio
Media Server
Settings
Extras
Settings
Edit Favorites
WLAN Access Point
WLAN Region
LAN IP
WLAN IP