FUJITSU DESKPOWER P310 - Manual (Page 48)

32
3 Remove the screw (1).
4 Remove the board from the system unit (2).
5 Place the board into appropriate packaging.
CAUTION
To ensure proper cooling, fire protection and observation of the relevant EMC
(electromagnetic compatibility) regulations, you must mount a rear slot cover plate.
Removing a board
1 Open the system unit (see "Opening the system unit").
2 Disconnect the cables connected to the board.
1
CHAPTER 4 Washingtons (27-38) 12/8/03, 11:43 AM 32